MICRO CONTROLLER, 10-20 AMP, COIN COUNTER

MC Series Coin Counter

TGC Delay on Make Relay Timer 10-30 Amps

Timing Mode | Single Shot

Category | Microprocessor

Series | MC with Relay Output

The MC series Coin Counting Timers combine a Single Shot timing mode and coin counting capability with microprocessor technology for reliability and accuracy.

Two 4-position binary dipswitches allow users to select the number of coins as well as the time period.

The switches can accommodate from 1 to 15 coins and accurately set time periods from .5 to 7.5 minutes with excellent repeatability.

Options include an accumulation function, a last-coin alarm or an output to a coin counter.

When required, the unit can be supplied with a fixed factory-set coin count or time period.

MC series coin counters come complete with a relay capable of switching loads up to 20 amps, 1.5HP. The electronic components are encapsulated in a 2.5" square package for protection from the elements.

Timing Mode

Input voltage is applied continuously. After the correct amount of coins has been counted by the timer, the relay will energize for the selected time period. The unit will automatically reset, after the selected time period expires and is ready for another cycle.

Cube Relay, 10-30 Amps, Timer with Relay Output
  • Coin mechanism debouncer
  • Coin jam sensor
  • Counts 1–15 coins (fixed or adjustable with dipswitch)
  • Counts 0.5–7.5 minutes (fixed or adjustable with dipswitch)
  • High current-carrying capacity—up to 20 amps, 1.5 HP
  • 100% Load isolation
  • No leakage in N.O. position
  • No heat sinking required
  • Totally encapsulated for protection from harsh environments
  • Transient protected
  • No minimum load required
  • 100% Operational testing before shipping
  • RoHS compliance available
Solid State DC Voltage
  • Input Voltage
    VDC: 12 or 24
    VAC: 24, 120, 230, 50/60Hz
    Special AC or DC voltages available
  • Time Delay
    Timing Mode: Single Shot on Make
    Type: CMOS – Programmable
    Time Range: 0.5–7.5 minutes (standard), Others on request
  • Repeatability
    ±0.1%
  • Setting Accuracy
    ±0.1% typical (fixed or variable)
  • Reset Time
    100 milliseconds
  • Protection
    Polarity Protection: All DC units have reverse polarity protection
    Transient Protection: 18 joules
    Dielectric Strength: 1800V RMS 60Hz
  • Temperature Ranges:
    Storage: -40°C to +85°C
    Operating: -25°C to +65°C
  • Coin Counter
    Up to 15 (standard), Others on request