CUBE RELAY, PERCENTAGE TIMER

TGQB Timers

TGC Delay on Make Relay Timer 10-30 Amps

Timing Mode | Repeat Cycle

Category | Timer with Relay

Series | TGQB

The TGQB is a recycle timer with a selectable cycle length and adjustable “On” time as a percentage of the total cycle from 1% to 99%.

Available relay ratings of 10 amps. Relay common is internally connected to the input voltage terminal to minimize terminal count.

Adjustment potentiometer is separate from the module to allow for panel mounting.

Timing Mode

Application of input voltage to the timer transfers the relay for the duration of the selected “On” time.

Relay then opens for “Off” time.

Recycling continues until power is removed.

Cube Relay, 10-30 Amps, Timer with Relay Output
  • Total cycle length of up to 24 hours available
  • Linear adjustability from 1% “On” to 99% “On”
  • Single #8 screw mounting
  • No leakage current in N.O. position
  • Transient and polarity protected
  • No heat sinking required
  • No minimum load required
  • Totally encapsulated for protection from harsh environments
  • 0.5% Repeat accuracy
  • Wide voltage 120/230 VAC input model available
  • 100% Operational testing before shipping
  • RoHS compliance available
Solid State DC Voltage
  • Input Voltage
    +20% / -10%
    VDC:     12 or 24
    VAC: 24 or 120-230, 50/60Hz
  • Time Delay
    Timing Mode: Recycle, Percentage Setting
    Type: Digital CMOS
    Time Range: Full cycle 10 sec. to 24 hour
  • Repeatability
    ±0.5%
  • Reset/Recycle Time
    100 milliseconds
  • Relay Life Expectancy
    Mechanical: Up to 10 million operations
    Electrical: 100,000 operations at maximum load
  • Protection
    Polarity Protection: All DC units have reverse polarity protection
    Transient Protection: 18 joules
  • Temperature Ranges
    Storage: -40°C to +85°C
    Operating: -25°C to +65°C