CUBE RELAY, 10-20 AMPS

TGKAB Timers

TGC Delay on Make Relay Timer 10-30 Amps

Timing Mode | Repeat Cycle, On/Off

Category | Timer with Relay

Series | TGKAB

TGKAB series Cube Relay Repeat Cycle On/Off timers are a unique combination of solid state timing circuitry with a relay output in a compact 2" x 2" configuration.

These solid state timers offer the many advantages of a relay output and provide the same functional performance as plug-in relay timers, but at significant cost savings.

Terminal #3 is common for both the input voltage and the load, thereby saving on installation cost.

Timing Mode

Application of input voltage to the timer starts the “On” time delay, and energizes the load.

At the end of the “On” time delay, the load is de-energized, and the “Off” time delay starts.

At the end of the “Off” time delay, the load is again energized, the timer returns to the “On” time delay, and the cycling continues as long as input voltage is applied.

Removal of the input voltage resets the timer.

Cube Relay, 10-30 Amps, Timer with Relay Output
  • High current-carrying capacity up to 20 amps
  • 100% Load isolation
  • No leakage in N.O. position
  • No heat sinking required
  • Available in any time delay periods required
  • Digital CMOS timing
  • Transient protected
  • No minimum load required
  • Totally encapsulated for protection from harsh environments
  • 100% Operational testing before shipping
  • RoHS compliance available
Solid State DC Voltage
  • Input Voltage
    VDC: 12, 24-28, or 48
    VAC: 24, 48, 120, or 230, 50/60Hz
    Optional: Any in-between AC or DC voltage
  • Time Delay
    Timing Mode: Repeat Cycle On/Off
    Type: Digital CMOS
    Time Range: 0.1 second to 24 hours
    Time Adjustments: Factory-fixed time period; variable, with knob on timer, or terminals for external resistor or potentiometer
  • Repeatability
    ±0.5%
  • Setting Accuracy
    Fixed time period: ±10% of nominal time; ±1% optional
    Variable time range: +15% -5% max. time, -10% min. time
  • Reset/Recycle Time
    25 milliseconds
  • Initiate Time
    6 milliseconds or less
  • Relay Life Expectancy
    Mechanical: 20 million operations
    Electrical: 100,000 operations
  • Protection
    Polarity Protection: All DC units have reverse polarity protection
    Transient Protection: 18 joules
    Dielectric Strength: 1800V RMS 60Hz
  • Temperature Ranges
    Storage: -40°C to +85°C
    Operating: -25°C to +65°C
  • Physical Data
    Mounting: Surface with one #8 screw
    Connection & Termination: 0.25" quick connects