SOLID STATE FLASHER, HIGH-CURRENT DC VOLTAGE

TFK Timers

TGC Delay on Make Relay Timer 10-30 Amps

Timing Mode | Repeat Cycle

Category | Flasher

Series | TFK

The TFK Timer is a high-current solid state DC flasher with both 12VDC and 24VDC input ratings.

 

Timing Mode

Application of input voltage starts an off/on 50% duty cycle to flash lights, alarms, etc. This off/on recycling continues until removal of input voltage.

Cube Relay, 10-30 Amps, Timer with Relay Output
  • Digital timing, solid state output
  • Up to 5 amp current load handling
  • No heat sinking required
  • 12VDC to 24VDC operation
  • Flash rates from 60 to 120 per minute
  • Totally encapsulated
  • Board mounting by center mounting post
  • Standard 6.35mm (0.25") quick connect blade terminals
  • Optional wire leads
  • 100% Operational testing before shipping
  • RoHS compliance available
Solid State DC Voltage
  • Input Voltage
    12 VDC to 24VDC (±10%)
  • Flash Rate
    From 60 to 120 F.P.M ±10% factory fixed
  • Repeatability
    ±0.05% under fixed conditions
  • Solid State Output
    up to 5 amps tungsten lamps, inductive or resistive loads
  • Life Expectancy
    No predictable failure if used within operating parameters
  • Protection
    Internal “Tranzorb” 600 watt peak energy capability
  • Temperature Ranges
    Storage: -40°C to +85°C
    Operating: -25°C to +65°C
  • Physical Data
    Surface mount with single #8 or #10 screw, totally encapsulated
  • Connection & Termination
    0.25” quick connects