SOLID STATE FLASHER, UNIVERSAL AC/DC WIDE VOLTAGE

TEK Flashers

TGC Delay on Make Relay Timer 10-30 Amps

Timing Mode | Repeat Cycle

Category | Flasher

Series | TEK

TEK flashers are an ideal substitute for mechanical flashers. They have no moving parts and are designed to mount onto a circuit board.

The CMOS timing provides excellent accuracy and repeatability.

Timing Mode

Application of input voltage to the timer starts the time delay. At the end of the delay period, the load is energized.

To reset, remove the input voltage to the timer.

Cube Relay, 10-30 Amps, Timer with Relay Output
  • Digital timing, solid state output
  • Up to 1 amp current load handling
  • 10 Amps single-cycle surge handling
  • Wide voltage range from 24 to 240 VAC and 12 to 48 VDC
  • ±0.5% Repeat accuracy
  • Time ranges up to 1 second
  • No moving parts
  • Totally encapsulated for protection from harsh environments
  • Board mounting by center mounting post
  • Standard 6.35mm (0.25") quick connect blade terminals
  • Optional wire leads
  • 100% Operational testing before shipping
  • RoHS compliance available
Solid State DC Voltage
  • Repeat Accuracy
    ±0.5% under fixed conditions
  • Timing Ranges
    0.1 sec. to 1 sec. factory-fixed
  • Tolerances
    Fixed: 10% of nominal time
  • Temperature Ranges
    Storage: -40°C to +85°C
    Operating: -25°C to +65°C
  • Life Expectancy
    No predictable failure if used within operating parameters
  • Protection
    Polarity Protection: All DC units are bi-polar
    Dielectric Strength: 1800V RMS 60Hz
  • Solid State Output
    N.O.
  • Load Current
    1 amp switching, 10 amps single cycle surge
  • Time Cycle Interrupt (Input Voltage Break)
    Resets timer to original state