CUBE RELAY, DIPSWITCH ADJUSTMENT

TGCB Timers

Solid State DC Voltage

Timing Mode | Delay on Make

Category | Timer with Relay

Series | TGCB

TGCB series Cube Relay Delay on Make timers are a unique combination of digital CMOS timing circuitry with a relay output in a compact 2" x 2" configuration.

These units provide the same functional performance as plug-in relay timers, at significant cost savings.

The relay common is internally connected to (+) or hot.

Timing Mode

Application of input voltage to the timer starts the time delay. At the end of the delay period, the load is energized. To reset, remove the input voltage to the timer.

Solid State DC Voltage
  • High current-carrying capacity up to 20 amps
  • Transient protected
  • 100% Load isolation
  • No leakage in N.O. position
  • No heat sinking required
  • Available in any time delay period required
  • Digital CMOS timing
  • No minimum load required
  • Totally encapsulated for protection from harsh environments
  • 100% Operational testing before shipping
  • RoHS compliance available
Solid State DC Voltage
  • Input Voltage
    VDC: 12, 24 or 48
    VAC: 24, 48, 120 or 230, 50/60Hz
    Special AC or DC voltages available
  • Time Delay
    Timing Mode: Delay on Make
    Type: Digital CMOS
    Time Range: 0.05 second to 24 hours
    Time Adjustments: Factory-fixed time period; variable, with adjustments on timer, or terminals for external resistor or potentiometer
  • Repeatability
    ±0.5%
  • Setting Accuracy
    Fixed time period: ±10% of nominal time
    Variable time range: +15% -5% max. time, -10% min. time
  • Reset/Recycle Time
    25 milliseconds
  • Initiate Time
    6 milliseconds or less
  • Relay Output Form
    Standard – SPST N.O.
    Optional – SPST N.C., SPDT
  • Relay Life Expectancy
    Mechanical: 20 million operations
    Electrical: 100,000 operations
  • Protection
    Polarity Protection: All DC units have reverse polarity protection
    Transient Protection: 18 joules
    Dielectric Strength: 1800V RMS 60Hz
  • Temperature Ranges
    Storage: -40°C to +85°C
    Operating: -25°C to +65°C
  • Physical Data
    Mounting: Surface with one #8 screw
    Connection & Termination: 0.25" quick connects