CUBE SOLID STATE, 1 AMP

TH3ML Timers

TGC Delay on Make Relay Timer 10-30 Amps

Timing Mode | Delay on Break

Category | Solid State Timer

Series | TH3ML

The TH3ML timers are solid state output Delay On Break timers in a fully encapsulated 2" x 2" case.

Time adjust can be with on board potentiometer, external resistor or factory fixed time.

Timing Mode

Input voltage is applied continuously. Upon closure of the normally open isolated external switch, the load is energized, and remains energized as long as it is closed.

When the external initiate switch opens, the time delay is started.

At the end of the time delay, the load is de-energized, and the timer is ready for another cycle.

Cube Relay, 10-30 Amps, Timer with Relay Output
  • Digital timing, solid state output
  • 1 Amp current handling
  • 10 Amps AC single-cycle surge handling
  • ±0.1% Repeat accuracy
  • Factory fixed or variable timing adjust
  • Single screw mounting through center mounting hole
  • Standard 6.35mm (0.25”) 5 terminal quick connects
  • 100% Operational testing before shipping
  • RoHS compliance available
Solid State DC Voltage
  • Input Voltage
    VAC: 24 or 120
    VAC: 230 (±20%)
    VDC: 12 or 24
  • Time Delay
    0.1 sec. to 24 hours (1 sec., 10 sec., 100 sec., 1000 sec. are standard)
    Special ranges available on request
  • Repeatability
    ±0.1% (under fixed conditions)
  • Reset/Recycle Time
    150 milliseconds maximum
  • Initiate Time
    16 milliseconds
  • Solid State Output Form
    Normally open 1 Amp steady state,
    10 Amp single-cycle surge
  • Life Expectancy
    No predictable failure if used within operating parameters
  • Protection
    Transient Protection: 18 joules
    Dielectric Strength: 1800V RMS 60Hz
  • Temperature Ranges:
    Storage: -40°C to +85°C
    Operating: -25°C to +65°C
  • Physical Data
    Surface mount with single #8 or #10 screw, totally encapsulated