DELAY ON MAKE

Delay on Make
  • When power is applied to timer input voltage terminals, the time delay begins
  • When the time delay expires, the timer output relay is energized
  • Input voltage must be removed to reset the time delay and de-energize the timer output relay

Delay on Break

Delay on Break
  • Power must be applied continuously to timer input voltage terminals and a normally open, dry contact switch attached to timer initiate terminal(s)
  • When the initiate switch closes, the timer output relay is energized
  • When the initiate switch re-opens the time delay begins

Repeat Cycle

Repeat Cycle
  • When power is applied to timer input voltage terminals, the timer output relay is energized for the duration of time delay
  • When the time delay expires, the timer output relay is de-energized for the duration of time delay. Timer output on / off cycling repeats until power is removed from timer input voltage terminals

Single Shot

Single Shot
  • Power must be applied continuously to timer input voltage terminals and a normally open, dry contact switch attached to timer initiate terminal(s)
  • When the initiate switch closes, the timer output relay is energized and the time delay begins
  • Opening and closing the initiate switch during the time delay is ignored

 

Interval On

Interval On
  • When power is applied to the input voltage terminals, the load is energized immediately and the time delay cycle starts. At the end of the delay period, the timer transfers back to its pre-power position
  • Removal and re-application of input voltage resets the timer

True Off

True Off
  • Power must be applied continuously to timer input voltage terminals and a normally open, dry contact switch attached to timer initiate terminal(s)
  • When power is removed from timer input voltage terminals, the time delay begins
  • When the time delay expires, the timer output relay is de-energized

Anti-Short-Cycle

Anti-Short-Cycle
  • Anti-short-cycle timer prevents premature cycling of compressors in refrigeration, air conditioning and heat pumps, thereby reducing nuisance tripping of fuse or circuit breaker
  • When power is applied (i.e. thermostat closes), the load energizes

Multifunction Relay

Multifunction Relay
  • Wide range of time delay setting using dip switch adjustment or on board potentiometers
  • Available in three separate models covering 12 timing modes and 1-30 amp load switching

 

Current Sensors

Current Sensors
  • CS Relay: Over-current and under-current sensing
  • HCS Solid State: High range over-current sensing, up to 60 amps
  • Current Sensors can be customized for your application

Custom Solutions

Custom Solutions
  • A multitude of options, plus in-house engineering, and direct communication throughout development and testing, ensures success for the most innovative or specialized controls
  • We can create a one-of-a kind solution that meets your needs perfectly

Accessories

Accessories
  • Potentiometers
  • Mounting Brackets
  • Knobs
  • Tie-Downs
  • Sockets
  • Transient Suppressors

Recent Blog Postings

The Pelco Pulse

Featured Products: Flexcon Test Connectors

Featured Products: Flexcon Test Connectors

Whenever connector reliability is important, you'll find NASA-approved FLEXCON text connectors. Flexcons are second to none in continuity, signal and voltage testing, the first choice for demanding co ...

Join our Team - Engineering Technician

Join our Team - Engineering Technician

We have an immediate opening for a Engineering Technician to join our team. The Engineering Technician will report directly to the Director of Engineering. Pelco Component Technologies is Putting P ...

Join Our Team:  Engineering Manager

Join Our Team: Engineering Manager

We have an immediate opening for a Engineering Manager to join our team. The Engineering Manager will report directly to the Director of Engineering. Pelco Component Technologies is Putting Power T ...

Read More

Testimonials

Why Pick Pelco?

As your single source for multiple lines with extensive options and custom solutions, Pelco Component Technologies is Putting Power to Work

Speak to a Rep Now!

I know you will do what you say and that you have the expertise to do it!

Your engineers work closely with us to develop the products we need.

Your people are very good at what they do and they do it right.

Engineering assistance, plus...Quick prototypes. Proven ability to custom design. Help if problems occur.

Contact Pelco

Contact

Follow

Connect With Us Through Social Media.
We want to make sure you have the opportunity to connect with us, and most importantly, with each other.

Subscribe

Subscribe to Our Email Newsletter
By signing up, you'll receive periodic updates, news and product releases.

Pelco | Putting Power To Work